Practical guide
AirNow Dial vs Fire and Smoke Map: Why the Displays Can Differ
A regional dial and the Fire and Smoke Map can show different information because they use different pollutant scopes, locations and data layers. Inspect those labels before choosing a value.
Start with the pollutant and the decision
During a wildfire-smoke event, AirNow recommends its Fire and Smoke Map for smoke information. That map focuses on fine particle pollution, PM2.5, and provides smoke-related information and actions. The general AirNow dial has a different purpose: it reports current air quality for a selected reporting area and can show the highest AQI from ozone or particle pollution.
That difference matters. A prominent number on a regional dial need not be the PM2.5 value at a nearby map point. It may reflect ozone, or a monitor elsewhere in the reporting area. Some dial areas may lack local PM2.5 data. A disagreement is therefore a reason to inspect the product labels, not a reason to average the two numbers or automatically dismiss one.
Neither product measures the air inside your home. Use the outdoor product to understand its outdoor question, then use the existing household guidance and applicable local emergency instructions for a room or equipment decision. Maps do not override evacuation instructions or resolve a household member’s individual health needs.
Compare the scope of the dial and maps
| Product | Main scope | Important location/data distinction | Reader check |
|---|---|---|---|
| Regional air-quality dial | Current NowCast; highest applicable ozone or particle AQI in the area | Regional reporting, not every street or indoor room | Read the driving pollutant and last-update hour |
| Fire and Smoke Map | PM2.5 and wildfire-smoke information | Permanent/temporary monitors plus crowdsourced sensor data | Read the selected point/layer and its time |
| Interactive air-quality map | Permanent ozone, PM2.5 and PM10 monitoring and contours | Contours are approximate information between monitoring locations | Inspect pollutant and whether the display is a point or contour |
| Forecast section | Predicted outdoor air quality for the stated day | A forecast product, not the current selected map sample | Read the date and local forecast discussion if available |
| Indoor home sensor | Only its actual measured channels and settings | Your sensor position and device-performance conditions | Keep it separate from these outdoor public products |
On a narrow screen, scroll inside the table to read the last column. Keyboard readers can focus the table and use the arrow keys.
This is a comparison of published product descriptions, not a screenshot of a current incident. No location-specific reading was retrieved for this guide. Inspect the live product yourself for the relevant place and time instead of using an illustrative category as today’s report.
AirNow’s public data undergo preliminary quality checks and are distinct from the fully validated regulatory record used for compliance determinations. The presence of a point on a public map does not mean every point has the same instrument, validation procedure or purpose.
A monitor and a crowdsourced sensor are different inputs
The Fire and Smoke Map includes additional data beyond permanent regulatory monitoring locations. Temporary monitors and crowdsourced sensors can provide useful information where permanent coverage is limited. They also bring different performance and interpretation questions. Read the selected layer and any information attached to the point rather than assuming all dots are equivalent regulatory monitors.
EPA explains that sensor data used on the Fire and Smoke Map receive quality checks and adjustment. Its sensor-data guidance describes an extended U.S. correction for PurpleAir reports before map display. That is a documented processing approach for that application, not a correction you should apply to every brand or an indoor home reading. Out-of-box sensor concentrations are not automatically comparable with regulatory monitoring.
Keep the location and reporting time attached to the value. A nearby outdoor point can be useful context, but your street, the reporting region and an occupied room are different places. Do not choose a more reassuring point farther away simply because its number is lower. If the layer or time is unavailable, preserve that missing information in the comparison.
Inspect a disagreement in four steps
Four checks before using a map value
- Confirm the product
Open the product relevant to the question. For wildfire smoke, AirNow directs users to Fire and Smoke Map; retain local instructions alongside it.
- Identify pollutant and layer
Read whether the selected value concerns PM2.5, ozone or another available channel, and whether it is a monitor, sensor, contour or forecast.
- Check place and time
Select the relevant nearby location, inspect its update information, and compare it with the region/date represented by the other display.
- Use the matching information
Describe any remaining difference explicitly. Choose a practical next step using the appropriate public guidance rather than averaging incompatible products.
When the unresolved difference is timing, use the NowCast, daily AQI and forecast guide. The current dial uses NowCast; a future forecast and a completed daily result answer other questions. Opening them at the same time does not align their time frames.
A useful private note records the product, selected point or region, pollutant, layer and update time. Record what you could not determine. The note is not a calibration or an assessment of personal exposure, but it can prevent a misleading comparison from being repeated.
Two display disagreements with a useful explanation
The dial is driven by a different pollutant
Fictional example; no household was inspected and no live reading or device test was performed.
A reader looking for smoke information sees a regional dial and a PM2.5 map point with different categories. The dial’s pollutant label indicates ozone. They initially conclude that the PM2.5 point must be wrong because the dial is more prominent.
They keep the two product labels and places in their record. For the smoke question they inspect the Fire and Smoke Map’s PM2.5 point/layer and update time, while retaining relevant general outdoor advice. They do not describe the ozone-driven regional number as the measured smoke level in their living room.
The dial and map have different pollutant and spatial scopes. A regional highest-pollutant AQI and a selected particle point can differ without either being a measurement of indoor air. Reading the pollutant is the first resolution, not combining the categories.
Several nearby dots are treated as interchangeable monitors
Fictional example; no household was inspected and no live reading or device test was performed.
Another reader sees several points on the smoke map and wants to take their average as a precise street reading. Some points belong to the sensor layer and others to a monitoring layer. Their available update information also differs.
They inspect each relevant point’s layer and time instead of calculating a precision-looking average. They use the published outdoor information as local context, note uneven coverage and uncertainty, and check appropriate local advice before their household decision. They do not copy a map correction into their indoor device.
Extra sensor coverage can be useful, but the data sources and their processing are not identical. A set of public points does not provide a validated indoor measurement or a guaranteed value at an unmonitored street. The map’s documented adjustments do not validate an unrelated home sensor.
Turn outdoor information into the right household question
If you need a room setup, use the cleaner-air room guide. If you need to understand fan, intake and filter controls, use the existing HVAC guide. Those pages address household equipment and conditions; this page addresses which outdoor display you are reading.
For an indoor sensor, compare outdoor AQI and indoor PM labels and check its placement. Do not let a green outdoor category erase an indoor-source question, and do not interpret a PM-only channel as a complete indoor-air assessment.
The private record below keeps the product and layer attached to the interpretation. Leave a current value blank until you actually consult the current product. This article supplies a method, not a live map, location report or promise of protection.
Sources and further reading
- AirNow: AQI BasicsEntire saved HTML main/article text checked November 13, 2026. Linked technical formulas, PDFs, model manuals and source images not read.
- AirNow: About the DataEntire saved HTML main/article text checked November 13, 2026. Linked technical formulas, PDFs, model manuals and source images not read.
- AirNow: How to Use This SiteEntire saved HTML main/article text checked November 13, 2026. Linked technical formulas, PDFs, model manuals and source images not read.
- EPA: Understanding Air Sensor DataEntire saved HTML main/article text checked November 13, 2026. Linked technical formulas, PDFs, model manuals and source images not read.