Practical guide
DIY Air Cleaner for Smoke: Filter Direction, Shroud and Design Choices
Use a DIY box-fan filter as a temporary option when known-performance cleaners are unavailable or unaffordable. Check the fan’s date, safety marking and instructions; compare simple, wedge and cube designs; keep filter arrows, seals and a front shroud correct. More filters do not establish your own unit’s CADR or cancel safety and maintenance needs.
Start with the temporary-use and fan checks
A DIY air cleaner attaches one or more high-efficiency furnace filters to a box fan. EPA describes it as an option when an air cleaner of known performance is not available or affordable. It is a temporary alternative, not a permanent equivalent to a measured commercial product. The construction, fan and filters affect performance, and your own unit has no known CADR just because it resembles a published example.
Before planning the build, check for a fan built in 2012 or later with a UL or ETL safety marking, and read its actual instructions. Do not use a damaged or malfunctioning fan, an extension cord or an unsafe electrical arrangement. EPA also says not to leave children unattended with the operating fan and to have working smoke detectors. If date, marking or instructions are missing, resolve them before treating the fan as suitable.
Compare the space and upkeep as well as the filter count
| Design | Arrangement | Practical trade-off |
|---|---|---|
| Simple | One matching filter flat behind the fan; front shroud. | Less bulky, easier assembly and generally lower supplies cost; less filter area. |
| Wedge | Two filters joined into a wedge behind the fan; sealed top/base and front shroud. | More filter area; extra sealing, cardboard parts and space. |
| Cube/box | Four side filters with a cardboard base, or five filters including the bottom; fan on top and front shroud. | More filter area; bulkier and more involved assembly/filter changes. A filtered bottom needs stable supports for airflow. |
On a narrow screen, scroll inside the table to read every column. Keyboard readers can focus the table and use the arrow keys.
EPA’s comparison generally favours multi-filter designs for CADR and operating electricity cost per CADR, while single-filter designs can be cheaper and simpler to build. The electricity comparison excludes replacement-filter cost. Do not quote it as proof of a lower total cost for every household. A unit that will not fit, remain stable or receive necessary filter care may fail the practical decision.
Thicker filters, more filters and a shroud can improve performance, but no fixed improvement percentage or personal room capacity is supplied here. EPA notes that performance can vary between builds—even after reassembly during a filter change. Use the space, assembly and maintenance differences rather than inventing a CADR for your particular fan.
Keep the filter-first path and shroud in the right places
For EPA’s simple design, the supply list uses a 20-by-20-inch box fan and a matching 20-by-20-inch filter, 1 to 4 inches thick, with MERV 13 suggested. Its instructions say to keep the pleats vertical, align the filter’s airflow arrows with the fan’s airflow, and place the filter so air passes through it before entering the fan. Seal the connection so air passes through the filter rather than around its edges.
The shroud is on the front, outlet side. It covers the outside corners while leaving a circular opening over the visible blade area. It is not a solid cover that blocks the outlet. The published basic, wedge and cube figures were checked for these directions; the diagram below summarises the decisions in original text rather than reproducing a manufacturer or government build photograph.
For the wedge, filters form a joined shape with sealed triangular top and base. For the cube, the side-filter arrows point inward and the fan blows out from the top. A fifth, bottom filter needs stable supports that leave room for bottom airflow. Use EPA’s complete build instructions and figures for the chosen design and the actual fan’s safety instructions. Do not cut, measure near moving parts or assemble while the fan is connected to power.
Sources: [4].
Choose a build you can safely assemble and maintain
A DIY supply-to-use sequence
- Check the fan
Confirm 2012-or-later date, UL/ETL marking, condition and actual instructions before assembly.
- Choose the design
Balance matching filters, space, stable support, assembly and future filter replacement.
- Confirm the air path
With the fan unplugged, check arrows, filter-first flow, gap seals and an open front shroud.
- Plan operating care
Keep airflow clear, follow fan safety directions and change dirty filters without shaking dust loose.
EPA advises high-efficiency filters, preferably MERV 13 or higher, and notes that 2-to-4-inch filters can improve performance compared with 1-inch filters. Those dimensions describe its published design choices; they do not establish fit for every fan. Do not remove a safety grille, rewire a motor or improvise an electrical repair to make materials fit.
Plan an actual place where the device can stand securely and air can flow freely around it, away from walls or objects that block flow. A larger cube needs more space than a single-filter arrangement. A drawing that looks compact on a screen does not measure your available floor space or eliminate a trip/exit obstruction.
Sources: [4].
Two complete fictional supply decisions
A fan whose date cannot be verified
Fictional example; not a household inspection or device test.
An invented household finds an old box fan in storage. The date is unknown, its instructions are unavailable, and no appropriate safety marking has been confirmed. The person has one furnace filter and wants to copy a single-filter picture.
Do not treat the available materials as a qualified build. Resolve the fan’s date, marking, condition and instructions or obtain appropriate materials; seek a known-performance cleaner if available and affordable.
A similar appearance is not the EPA fan eligibility check. The scenario does not establish that an unidentified old fan is suitable for unattended use or sleeping.
Enough filters for a cube, but no stable bottom clearance
Fictional example; not a household inspection or device test.
A second fictional household has an eligible documented fan and five matching filters. Its proposed spot has too little stable space for a cube with bottom-filter supports. No safe support arrangement has been identified.
Do not block the bottom filter or create an unstable stack. Choose an arrangement that can actually stand and allow airflow, or revise the location/material plan using the published design instructions. Keep the own-unit CADR unknown.
The five-filter diagram requires supports for bottom airflow. More filter area does not cancel an unstable placement, and this fictional supply check is not a completed build or performance test.
Use the actual safety instructions and change filters carefully
EPA recommends running the cleaner as often as possible at the highest fan speed when the room is occupied, while following the actual fan instructions. Higher speed can increase filtration but also noise and air movement. Do not turn a performance suggestion into permission for an unsafe fan, power arrangement or unattended children.
Keep spare filters available. Check them frequently and change them when dirty or starting to smell; during smoke, that can be more often than a routine calendar suggests. Unplug for handling and follow the actual instructions. EPA advises removing filters gently without shaking or banging, disposing of them in a garbage bag and washing hands afterwards. It does not provide a washing method for an unknown filter.
The final record should distinguish eligibility checked, assembly completed, filter changed and performance unknown. A completed build is not proof that the room is smoke-free. Continue local smoke/fire advice and the cleaner-air-room checks for heat, power, smoke entry and whether staying home remains appropriate.
Sources and further reading
- CARB: Certified Devices—introductory textCARB main text outside the device table only; no individual product listing checked. Source text checked November 13,2026. Current saved official HTML guidance.
- EPA: Wildfires and Indoor Air QualitySource text checked November 13,2026. Current saved official HTML guidance.
- EPA: Create a Clean Room During a WildfireSource text checked November 13,2026. Current saved official HTML guidance.
- EPA: DIY Air CleanersSource text checked November 13,2026. Current saved official HTML guidance.
- EPA: Indoor Air FiltrationSource text checked November 13,2026. Current saved official HTML guidance.
- CARB: Air Cleaner Information for ConsumersSource text checked November 13,2026. Current saved official HTML guidance.
- EPA: Guide to Air Cleaners in the HomeSource text checked November 13,2026. Retained November 11 HTML consumer-guide response reread; no fresh PDF acquired.